GoPro Hero 5 Black and Session
Fri Feb 17, 2017 1:03 am
Let me repeat again with simpler explanation on this Mic thingy for Black5, so that you guys know what to expect.
Hero4 uses analog input for mic, its pure wire to wire matters. So what the old 3.5mm mic adapter did was... to use a few connections already available on the Hero4 unique 10 connections USB port. USB 2.0 standard is 5 connection only.
So I said that GoPro unique 10 connections USB port is indeed unique. 1 row of 5 pins is USB.Org standard, 1 other row of 5 pins is GoPro own connection, and mic connection is there.
Black5 is totally a different, it does not allow analog simple wire connection for external mic.
It uses a true USB-C standard, and GoPro no more wants its mic adapter to inject analog signal, GoPro wants digital signal because it will create a stand-alone professional WAV file for every video which uses this Pro 3.5mm mic adapter. This thing is not an adapter, it is actually a CONVERTER. Analog to digital converter that is.
This is the flow/connection chart :
Old hero 4
External Mic >>> 3.5mm mic adapter >> mic gets connection to the available pins of the 10 pins unique USB port on camera.
Hero4 then recognized this input and bypass its built in mic and instead uses the external mic feed. Audio remain as stereo, only 2 channel in the MP4 video output of Hero4.
External Mic >>> analog signal >>>Pro 3.5 mm mic adapter/converter >> analog signal converted to digital WAV by the adapter/converter>>>converted to USB-C standard so that it can use the USB-C data path>> camera then detect this WAV file and create a separate extra WAV audio track while its MP4 still has its own audio track. So basically the output MP4 video is still stereo but extra WAV audio file is available for signal from the external mic. This is why this adapter/converter cant be cheap and small as old model adapter, because it has electronics inside it and also can do power injection thru USB-C too.
Well GoPro can actually make a USB-C 3.5mm mic adapter a dummy version like the old one, I am sure but they will load their cam processor more if they want to create that beautiful high end WAV file.
The WAV file Gopro uses is professional specification, no kidding.
It is a PCM Signed 32-bit little-endian, 1024kbps, 48000Hz 4 channels.
So remember and dont think this is wire to wire matters, its much more complex.
Tue Mar 21, 2017 5:27 am
This is my first post here. I hope I might be able to get a little help.
I have a GoPro Hero 5 and I have it adapted for use on a DJI Osmo Mobile. Since the GoPro records all of the motor noises of the gimbal, I decided to get the GoPro microphone adapter to use an off-camera microphone (Rode VideoMicro). It works fine with the mic plugged into the GoPro adapter and the adapter plugged into the Hero 5. I have audio preferences set to "Standard".
Here is the problem though...
The GoPro mic adapter is too short. As another guy mentioned here, the way around this is to add an extension cable from the GoPro to the GoPro Mic Adapter, so the rectangular brick can be mounted on the gimbal and not suspended with the camera. Every single USB Type-C extension cable I have tried does not work. I really don't get it. I mean, isn't every wire simply connected at one end and the other end? What gives? Any work arounds?
In essence, I am looking for a short USB Type-C extension cable that will plug into the Hero 5 on one end (Male End) and the GoPro Microphone adapter at the other end (Female End).
Wed Mar 22, 2017 5:16 am
Does anyone have any insight as to why an extension cable will not work with the GoPro Mic Adapter? See my post above.
Fri Mar 24, 2017 3:57 am
I have no experience with USB-C extension cable.
All I can say is that, your USB-C extension cable is probably not 100% USB-C standard compliance.
When an extension cable does not work, and without it the Pro 3.5mm mic adapter works, it can only mean the extension cable is at fault.
Reading initial mayhem of USB-C cable : http://www.pcworld.com/article/3002064/ ... names.html
I am not surprised some crap-shiet manufacturer does not follow USB.org standard.
USB-C is not free, one must pay and register and be tested.http://www.usb.org/developers/compliance/cable/http://www.usb.org/developers/usbtypec/
Do more careful shopping...
Wed Mar 29, 2017 4:06 am
As long as all the pins are straight through it should work. Most likely it's just passing the VBAT, GND and D+/D- lines and not the full 24 USB-C pins.
Wed Mar 29, 2017 7:34 am
That was my feeling as well. It is so frustrating after trying three separate cables. Ugh.
I want a short male (90 degree) to straight female USB Type C cable, with full pin connections. Any thoughts on a source??
Tue Apr 18, 2017 12:25 pm
Give it some time. Someone will make something that will work with the H5
Sent from my SAMSUNG-SM-N920A using Tapatalk
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.