Welcome
Welcome to goprouser

You are currently viewing our boards as a guest, which gives you full access to view most discussions and access.. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements if any. Registration is fast, simple, and absolutely free, so please, join our community today! Any issues email goprousergroup@gmail.com

BlurFix Brand Underwater Adapter

This section is for PRODUCT REVIEWS done by GoProUserForum Admins. If your company would like to be included here, please PM RAMBO for details.

BlurFix Brand Underwater Adapter

Postby Rambo » Wed Jul 13, 2011 9:14 pm

This single Product fixes 3 common issues with the GoPro HD Camera
1. The underwater focus
2. Inability to attach filters
3. Fogging

Image

I found the adapter and filter very easy to install, taking no longer than 10mins, just follow the well written and pictorial instructions included. (See Video below)
I was very impressed with the build quality, the BlurFix is machined from a single piece of Aluminum billet and is Anodized to prevent reflections.
The two most popular modes R3 720 and R5 1080 show no signs of vignette, however if your GoPro camera is not perfectly aligned within the case you may see a small vignette on one side in R3 mode, simply ensure your camera is seated correctly. My one year old camera had a slot worn in it where it had vibrated against the case locating lugs at some point, so needed the wear slot fixed, my newer cameras had no issues. There is vignette in R4 960 mode, but it's not a mode most people use underwater. The high quality filter that came with the BlurFix has the outer threads machined off to make it low profile, so stacking filters is not possible, but you have the option of changing the filter to say a CY filter, polarized etc. If want to use your own filters, they must also be low profile. Or there is a range of quality low profile filters available from BlurFix.

The video below confirms underwater sharpness is now optimal and you have the option to remove the filter for above water shooing if required and leave the adapter in place. I tested the unit to 50ft over 1 hour with a line and anchor and it remained completely watertight. I have no reason the believe it won't go lower, the manufacturer has tested to 130ft.

I found the anti fogging beads worked perfectly, not once did i see any fogging and i assembled the GoPro and filter in midday 22 degree, 65% humidity conditions. For comparison i also had an unmodified GoPro accompany the test unit and it fogged. Be aware though, you must ensure the O ring, adapter and filter is free of any water/sweat inside the cavity for the beads to do their job of absorbing moisture in the air.

Pros and Cons

Pros

    Easy to fit
    Glass not Plastic
    Precision made from solid billet (one piece)
    The flat black anodizing eliminates reflections
    Original case dome lens remains intact so does your main case waterproofing.
    Can be fitted with most 55mm filters (polarized, ND, UV, Grad etc)
    No Fogging - replaceable desiccant beads
    Completely fixes the focus issue in 720 and 1080 modes (no vignette)
    Does not interfere with camera operation - buttons etc.
    Optimal focus in or out of the water
    Can be used above water with no vignetting in all modes (including R4 960 and stills) when filter and o-ring are removed (adapter stays)

Cons

    Requires assembly (application of silicon)
    Will require maintenance to prevent filter threads from sticking (lube)
    Overall Slightly more added weight.
    Slight vignette in Stills mode and R4

Highly recommended for the following uses

    Underwater Video and Stills
    Canoes and Kayaks for the anti fogging attributes and water droplet repelling flat lens.
    Airplanes or situations where an ND, polarizing filter or other filters are required.
    Shutter speed control.
    You could get very creative with Graduated ND filters, especially in Snow or Timelapse videos.

You could use it for motorsports as long as you're aware the filter glass may break if hit hard enough.

I have not been paid for this review, the supplier simply shipped me a single product unit to independently review.

Suppliers Website http://www.snakeriverprototyping.com/products.html

This video showcases the product installation and underwater testing, however refer to the FULL product instructions that come with the BlurFix to Install it.
Please feel free to discuss the BlurFix here,http://goprouser.freeforums.org/blurfix-gopro-adapter-independant-review-t3582.html the manufacturer has indicated they are delighted to answer any question you may have, likewise myself.




R
User avatar
Rambo
Site Admin
 
Posts: 7353
Joined: Thu Sep 04, 2008 2:34 pm
Location: Mooloolaba, Qld Au

Return to Product Reviews

Who is online

Users browsing this forum: No registered users and 1 guest

suspicion-preferred